Published Oct 10, 2026 · Best Price DTF
DTF Heat Press Settings and Instructions
The difference between a transfer that peels after one wash and one that lasts 100+ washes is usually heat press settings. Here are the numbers we recommend.

DTF transfers are forgiving, but they still need the right temperature, pressure and time. These are the settings we use and recommend to our wholesale customers.
Recommended settings
- Temperature: 315–325°F (157–163°C)
- Pressure: medium to firm
- Time: 6–12 seconds
- Peel: hot peel, immediately after pressing
Step by step
- Pre-press the garment for 3–5 seconds to remove moisture.
- Place the transfer with the printed side down on the fabric.
- Press with firm pressure for 6–12 seconds.
- Peel the film while it is still warm using a smooth, even motion.
- Cover with parchment or a Teflon sheet and press again for 2–3 seconds for extra durability.
Troubleshooting
If the design lifts with the film, increase pressure or time. If edges look melted, lower the temperature slightly. Always test on a scrap garment before a production run.
Care instructions
Wash inside out in cold water. Tumble dry low or hang dry. Do not iron directly on the print.
Ready to press your first order?
Upload artwork and we will print, powder and ship it the same business day.